Difference between revisions of "Template:CreditLine Apply To All Auths"

From Payment Processing Software Library
Jump to: navigation, search
Line 1: Line 1:
 
<font color=#ff0000>If you use '''Apply To All Auths''', you do '''not''' need to setup the [[CreditLine Authorization Configuration]].</font>
 
<font color=#ff0000>If you use '''Apply To All Auths''', you do '''not''' need to setup the [[CreditLine Authorization Configuration]].</font>
 +
Version 3.03.09 and up allows you to propagate the Merchant Setup in [[CreditLine Settlement Parameters Dialog]] to all accepted cards.
  
−
Version 3.02.x and up allows you to propagate the Merchant Setup in [[CreditLine Settlement Parameters Dialog]] to all cards that have the same processor selected in '''Net Type''' in [[CreditLine Authorization Parameters Dialog]].  This assures the same setup for both Authorization and Settlement, if desired.
 
−
 
−
To use '''Apply To All Auths''' option:
 
−
*If using version below 3.03.09 (upgrade '''highly''' recommended), make sure that the '''Net Type''' in [[CreditLine Authorization Parameters Dialog]] for all cards is set to the '''same processor'''.  Only the cards assigned to the '''same processor''' will be affected by '''Apply To All Auths''' option. If necessary, you may use '''[[CreditLine_Authorization_Configuration#Apply_To_All|Apply To All]]''' in the  [[CreditLine Authorization Parameters Dialog]] (you can leave the Merchant Setup empty after selecting the processor by clicking '''Cancel''' on [[CreditLine Merchant Setup Dialog]] when prompted) to propagate the '''Net Type''' across all enabled cards.
 
 
*Always check '''[[CreditLine Manager Info Panel]]''' for warnings after '''[[CreditLine Configuration Reload|reloading the configuration]]'''
 
*Always check '''[[CreditLine Manager Info Panel]]''' for warnings after '''[[CreditLine Configuration Reload|reloading the configuration]]'''
−
 
+
−
&rarr; For older versions fill out the merchant setup in Authorization Configuration in a similar manner to Settlement Configuration.
+
For older versions see [[CreditLine Apply To All Auths 3.02.x-3.03.09]]

Revision as of 03:28, 6 February 2007

If you use Apply To All Auths, you do not need to setup the CreditLine Authorization Configuration. Version 3.03.09 and up allows you to propagate the Merchant Setup in CreditLine Settlement Parameters Dialog to all accepted cards.

For older versions see CreditLine Apply To All Auths 3.02.x-3.03.09

Retrieved from "http://docs.911software.com/credit_card_processing_software/index.php?title=Template:CreditLine_Apply_To_All_Auths&oldid=3431"