Vantiv Fifth Third Bank Setup

From Payment Processing Software Library
Jump to: navigation, search
This article is part of the
Payment Processing Software Library

Categories

Get it...

Credit Card Software
Download

Install it...

Installation
Upgrade & Migration

Connect to it...

Point Of Sale Integration

Set it up...

Quick Start Guide
Setup
Processor Setup

Licensing

Learn to use it...

Manual & User Guide
Knowledge Base
Frequently Asked Questions
Compliance Guide
Merchant Account Rates
User Interface Guides

Fix it...

Errors & Troubleshooting
Knowledge Base
Corrupted Install Repair

Get Help...

Contact
Processor Support Contacts

More Info ...

Glossary
Articles

See also...

911 Software
Help

CreditLine Payment Processing Software Processor Setup - Vantiv - 5/3rd Bank IP Setup. This site can also be reached at http://docs.911software.com

Looking for better rates?   Get a Free Credit Card Processing Cost Comparison!

Contacts

Please see Processor Support Contact List

Minimum Requirements

Requires CreditLine version 4.1.3(SP3) or later

Firewall And Connection Information

IMPORTANT: If using a firewall, please open port 443 for both incoming and outgoing traffic

This information is set in c:\911\data\ccv_link.ini

[Link CGI.F3VCGI]
Host=sslgw1.53.com
TestHost=cert02.53.com
Port=443
App=/USB/Gateway

Mastercard Unique Lane ID Mandate

To comply with the Mastercard Unique Lane ID Mandate, you will need to get a a unique Lane ID/Terminal ID per client terminal directly from the processor (5/3rd - Vantiv).

To utilize these IDs: Open the file \911\Data\POSREGISTRATION.INI and input 4 digits Lane IDs/Terminal IDs as shown below (see separate Single Merchant and Multiple Merchant scenarios), then restart the server.

Single Merchant

[MERC.TERMINALID]
ProTerminalID1=0001
ProTerminalID2=0002
ProTerminalID3=0003
ProTerminalID4=0004

Multiple Merchant

[MERC.TERMINALID]
ProTerminalID1=0001
ProTerminalID2=0002
ProTerminalID3=0003
ProTerminalID4=0004

[MERC1.TERMINALID]
ProTerminalID1=0001
ProTerminalID2=0002
ProTerminalID3=0003
ProTerminalID4=0004

[MERC2.TERMINALID]
ProTerminalID1=0001
ProTerminalID2=0002
ProTerminalID3=0003
ProTerminalID4=0004

Merchant Setup

→NOTE: For IP setup use St. Pete platform. Dial-up is supported through VITAL interface only!

Mapping
Acquirer Bin(6) Merchant ID(12) Store ID(4) Terminal ID(3)
134000 000????????? 1340 0???
6 positions: always 134000 12 positions: three (3) zeros followed by nine-digit Fifth Third merchant number 4 positions: always 1340 4 positions: one (1) zero, followed by three digit terminal number provided by Vantiv

User ID and Password are the same for all merchants (auto-filled)

Connection Configuration

Enter CreditLine Connection Setup Dialog

Select the Parameters as shown

Click OK and OK to close all dialogs.

Merchant Setup

Settlement Configuration

Vantiv - 5/3rd Bank needs a precise Batch ID for settlement. If you are getting a Duplicate (DUP) error during Batch, please call Vantiv to obtain the correct Batch ID. See below for a screenshot.

You have to call them to get the right Current Batch ID to be entered into the Settlement Config. Enter CreditLine Settlement Parameters Dialog

Please, make sure that the Store Number (StoreID) is always the same as the Bank Number.

See Authorization Configuration for info on Apply To All Auths checkbox
Don't forget to enter the Lane IDs into the ini file!

Authorization Setup

If you use Apply To Auths in CreditLine Settlement Configuration, you do not need to setup the CreditLine Authorization Configuration.

ApplyToAuthsOnly.gif

→ If Apply To Auths is checked, version 3.03.09 and up propagates the Merchant Setup in CreditLine Settlement Parameters Dialog to the Authorization Configuration in CreditLine Authorization Parameters Dialog for all accepted cards of the same class.

For older versions see CreditLine Apply To All Auths Legacy

Also See

CreditLine Setup Sheet