Difference between revisions of "HPS IP Setup"

Revision as of 15:53, 13 October 2006

CreditLine Payment Processing Software CreditLine Processor Setup. This site can also be reached at http://docs.911software.com

→ Looking for better rates?   Get a Free Credit Card Processing Cost Comparison!

Contacts

Please see Processor Support Contact List

Firewall And Connection Information

IMPORTANT: If using a firewall, please open port 443 for both incoming and outgoing traffic

This information is set in c:\911\data\ccv_link.ini

[Link TCP.HPSSSL]<br\> Host=httpsprod.secureexchange.net<br\> Port=443<br\> TestHost=httpstest.secureexchange.net<br\>

Connection Setup

1. Enter CreditLine Connection Configuration Dialog
2. Select the first line and click Edit
3. Configure as shown below

HPS Connection Setup

Merchant Setup

Authorization Setup

If you use Apply To Auths in CreditLine Settlement Configuration, you do not need to setup the CreditLine Authorization Configuration.

→ If Apply To Auths is checked, version 3.03.09 and up propagates the Merchant Setup in CreditLine Settlement Parameters Dialog to the Authorization Configuration in CreditLine Authorization Parameters Dialog for all accepted cards of the same class.

• Always check CreditLine Manager Info Panel for warnings after reloading the configuration

For older versions see CreditLine Apply To All Auths Legacy

Settlement Configuration

1. Enter CreditLine Settlement Parameters Dialog
2. Configure the Settlement as shown below by selecting the correct Net Type ;
   

   See Authorization Configuration for info on Apply To All Auths checkbox
3. Click Merchant Setup to enter Merchant Setup Dialog and configure Merchant Info as shown below ;
   

   HPS Merchant Setup

Also See

CreditLine Setup Sheet