Rush Approval Mode
This article is part of the Payment Processing Software Library |
|
Get it... | |
Install it... | |
Connect to it... | |
Set it up... | |
Learn to use it... | |
→ Manual & User Guide | |
Fix it... | |
→ Errors & Troubleshooting | |
Get Help... | |
More Info ... | |
See also... | |
CreditLine Payment Processing Software Setup. This site can also be reached at http://docs.911software.com
→ Looking for better rates? Get a Free Credit Card Processing Cost Comparison!
Contents
Compatibility
Requires version 3.03.13+
Function
Rush Approval Mode is a transparent offline mode. If enabled during loss of connectivity to the processor, the credit card transactions are recorded offline for later processing. No interface changes are required on the POS side, as the POS is receiving temporary Authorization Codes. Once the connection is back up the logged transactions are processed online and the temporary Authorization Codes are replaced with live Authorization Codes.
See the Flow Chart below for details.
Enabling
To enable, uncomment (remove the leading ; before) UseRushApproval=YES in the CreditLine Advanced Setup file and restart the CreditLine Server. See http://www.911software.com/files/911_CCV.INI for the full option list.
Configuration
The following are the configuration settings that you can add to CreditLine Advanced Setup file under [911_ccv] section.
;............................... ; Rush Approval Settings ;.............................. ; ;Enable Rush Approval ;Default: NO ;UseRushApproval=YES ; ;The number of errors that will make the server go in to the rush approval mode. ;AutoRushApprovalInvocationErrorCount=3 ; ;Number of minutes for the server to come out of the rush approval mode when idle. ;AutoRushApprovalExpiration=40 ; ;............................... ; End of Rush Approval Settings ;..............................
Rush Approval
In Rush Approval mode you will get Authorization Codes that start with RUSH.
Viewing Rush Approval Transactions
Enter CreditLine ViewModify Dialog
Re-Trying Rush Approval Transactions Manually
The Rush-Approval Transactions will be re-tried automatically upon expiration of AutoRushApprovalExpiration timeout. Otherwise, you can re-try them automatically at any time.
- Enter CreditLine ViewModify Dialog
- Check Rush Approval Only Checkbox to show Rush Approval Transactions and Re-Auth Button
- Select a set of transactions that you want to re-try and hit Re-Auth Button
You can re-try as many times as you want.