CreditLine Apply To All Auths Legacy
This article is part of the Payment Processing Software Library |
|
Get it... | |
Install it... | |
Connect to it... | |
Set it up... | |
Learn to use it... | |
→ Manual & User Guide | |
Fix it... | |
→ Errors & Troubleshooting | |
Get Help... | |
More Info ... | |
See also... | |
CreditLine Payment Processing Software Setup. This site can also be reached at http://docs.911software.com
→ Looking for better rates? Get a Free Credit Card Processing Cost Comparison!
Contents
Legacy Implementation Of Apply To All Auths
Version 3.03.09 and up
Versions 3.03.09 propagate the Merchant Setup in CreditLine Settlement Parameters Dialog to all accepted cards.
Version 3.02.x - 3.03.08
Versions 3.02.x and up to 3.03.08 allows you to propagate the Merchant Setup in CreditLine Settlement Parameters Dialog to all cards that have the same processor selected in Net Type in CreditLine Authorization Parameters Dialog. This assures the same setup for both Authorization and Settlement, if desired.
To use Apply To All Auths option:
- If using version below 3.03.09 (upgrade highly recommended), make sure that the Net Type in CreditLine Authorization Parameters Dialog for all cards is set to the same processor. Only the cards assigned to the same processor will be affected by Apply To All Auths option. If necessary, you may use Apply To All in the CreditLine Authorization Parameters Dialog (you can leave the Merchant Setup empty after selecting the processor by clicking Cancel on CreditLine Merchant Setup Dialog when prompted) to propagate the Net Type across all enabled cards.
Versions below 3.02.x
For versions below 3.02.x fill out the merchant setup in Authorization Configuration in a similar manner to Settlement Configuration.