CreditLine Authorization Configuration
This article is part of the Payment Processing Software Library |
|
Get it... | |
Install it... | |
Connect to it... | |
Set it up... | |
Learn to use it... | |
→ Manual & User Guide | |
Fix it... | |
→ Errors & Troubleshooting | |
Get Help... | |
More Info ... | |
See also... | |
CreditLine Payment Processing Software CreditLine Setup. This site can also be reached at http://docs.911software.com
→ Looking for better rates? Get a Free Credit Card Processing Cost Comparison!
Contents
Apply To All Auths
→ If you used Apply To All Auths in CreditLine Settlement Configuration, you can skip Authorization Configuration.
Authorization Configuration
- Start CreditLine Manager
Selecting Accepted Cards
→ Versions below 3.03.09 do not have the Accepted indicator in the screen above. In this case every card type needs to be checked in sequence
Check that the accepted and not-accepted cards are setup as you intend. To correct follow the procedure below:
1) Select a card which accepted status you need to change (e.g. VISA, Discover or MasterCard) and click EDIT
2) Make sure Card is Accepted is CHECKED (YES).
3) Click Ok to save Authorization Parameters dialog.
4) For versions below 3.03.09 repeat the steps above for every card that you intend to accept and make sure that Make sure Card is Accepted is CHECKED (YES).
→ Note: Custom cards can also be defined with the Ranges
If you add any accepted cards after the setup is complete, make sure to use Apply To All to copy the setup.
Setting up Authorization Parameters
1) Select a card that you intend to process (e.g. VISA, Discover or MasterCard)
2) Make sure Card is Accepted and Apply to All are both CHECKED (YES)
3) Click Merchant Setup and fill in the information.
Follow CreditLine Processor Setup Guidelines for individual processor setup.
Apply To All
→ Do not forget to check Apply to All (see screenshot above)! This will propagate the changes to all cards that are already selected to be accepted.
Checking For Errors
PLEASE, check CreditLine Manager Info Panel for errors after CreditLine Configuration Reload. In initial setup it is possible to overlook the fact that some cards are not setup to go to the live account that you are using. Use Apply To All to correct.
Default Dial-Up Numbers
For Dial-up: the default dial-up numbers are programmed into CreditLine. If the phone number field is empty, it will be auto-filled after you click OK in Merchant Setup in CreditLine Settlement Configuration dialog. In the latest versions, you can also click Default next to the Phone Numbers fields to auto-fill them, otherwise, delete the phone numbers before entering Merchant Setup to use the auto-fill feature.
Adding Accepted Cards
If you add any card types later you can open VISA dialog again, select Apply to All and click OK. Apply to All will propagate the changes to all cards that are selected to be accepted.
Processor Setup
Follow CreditLine Processor Setup Guidelines for individual processor setup.