Difference between revisions of "CreditLine Firewall Settings"

From Payment Processing Software Library
Jump to: navigation, search
 
(Processor Required Ports)
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
==Processor Required Ports==
 
==Processor Required Ports==
Make sure that the port required by the processor is open for BOTH inbound and outbound traffic in the firewall. If not sure, disable the firewall temporarily and try again. There could be a Windows firewall, third party firewall or hardware firewall installed on your system.
+
#Make sure that the port required by the processor is open for BOTH inbound and outbound traffic in the firewall. If not sure, disable the firewall temporarily and try again. There could be a Windows firewall, third party firewall or hardware firewall installed on your system.
 +
#In addition, if you are restricting the IP addresses available to the network, make sure that the DNS entry for the processor's '''HOST''' can be resolved without any problems.
  
'''see [http://www.911software.com/doc/Setup/Processor/Processor%20Setup.htm Processor Setup Guides]''' - click on your processor to determine the correct port.
+
→ To determine the correct '''port''' and the '''host DNS entry''', see '''[[CreditLine Processor Setup]]'''.
  
[[Category:Setup]]
+
[[Category:CreditLine Setup|F]]

Latest revision as of 19:12, 21 March 2007

This article is part of the
Payment Processing Software Library

Categories

Get it...

Credit Card Software
Download

Install it...

Installation
Upgrade & Migration

Connect to it...

Point Of Sale Integration

Set it up...

Quick Start Guide
Setup
Processor Setup

Licensing

Learn to use it...

Manual & User Guide
Knowledge Base
Frequently Asked Questions
Compliance Guide
Merchant Account Rates
User Interface Guides

Fix it...

Errors & Troubleshooting
Knowledge Base
Corrupted Install Repair

Get Help...

Contact
Processor Support Contacts

More Info ...

Glossary
Articles

See also...

911 Software
Help

CreditLine Payment Processing Software Setup. This site can also be reached at http://docs.911software.com

Looking for better rates?   Get a Free Credit Card Processing Cost Comparison!

Processor Required Ports

  1. Make sure that the port required by the processor is open for BOTH inbound and outbound traffic in the firewall. If not sure, disable the firewall temporarily and try again. There could be a Windows firewall, third party firewall or hardware firewall installed on your system.
  2. In addition, if you are restricting the IP addresses available to the network, make sure that the DNS entry for the processor's HOST can be resolved without any problems.

→ To determine the correct port and the host DNS entry, see CreditLine Processor Setup.