Vantiv Fifth Third Bank Setup
This article is part of the Payment Processing Software Library |
|
Get it... | |
Install it... | |
Connect to it... | |
Set it up... | |
Learn to use it... | |
→ Manual & User Guide | |
Fix it... | |
→ Errors & Troubleshooting | |
Get Help... | |
More Info ... | |
See also... | |
CreditLine Payment Processing Software Processor Setup - Nova IP. This site can also be reached at http://docs.911software.com
→ Looking for better rates? Get a Free Credit Card Processing Cost Comparison!
Contents
Contacts
Please see Processor Support Contact List
Minimum Requirements
Requires CreditLine version 4.1.3(SP3) or later
Firewall And Connection Information
IMPORTANT: If using a firewall, please open port 443 for both incoming and outgoing traffic
This information is set in c:\911\data\ccv_link.ini
[Link CGI.F3VCGI] Host=sslgw1.53.com TestHost=cert02.53.com Port=443 App=/USB/Gateway
Mastercard Unique Lane ID Mandate
To comply with the Mastercard Unique Lane ID Mandate, you will need to get a a unique Lane ID/Terminal ID per client terminal directly from the processor (5/3rd - Vantiv).
To utilize these IDs: Open the file \911\Data\POSREGISTRATION.INI and input 4 digits Lane IDs/Terminal IDs as shown below (see separate Single Merchant and Multiple Merchant scenarios), then restart the server.
Single Merchant
[MERC.TERMINALID] ProTerminalID1=0001 ProTerminalID2=0002 ProTerminalID3=0003 ProTerminalID4=0004
Multiple Merchant
[MERC.TERMINALID] ProTerminalID1=0001 ProTerminalID2=0002 ProTerminalID3=0003 ProTerminalID4=0004
[MERC1.TERMINALID]
ProTerminalID1=0001
ProTerminalID2=0002
ProTerminalID3=0003
ProTerminalID4=0004
[MERC2.TERMINALID] ProTerminalID1=0001 ProTerminalID2=0002 ProTerminalID3=0003 ProTerminalID4=0004
Connection Configuration
Enter CreditLine Connection Setup Dialog
Click OK and OK to close all dialogs.
Merchant Setup
Settlement Configuration
Enter CreditLine Settlement Parameters Dialog
Authorization Setup
If you use Apply To Auths in CreditLine Settlement Configuration, you do not need to setup the CreditLine Authorization Configuration.
→ If Apply To Auths is checked, version 3.03.09 and up propagates the Merchant Setup in CreditLine Settlement Parameters Dialog to the Authorization Configuration in CreditLine Authorization Parameters Dialog for all accepted cards of the same class.
- Always check CreditLine Manager Info Panel for warnings after reloading the configuration
For older versions see CreditLine Apply To All Auths Legacy