Difference between revisions of "Chase Paymentech Debit Card Setup"

Revision as of 20:35, 9 May 2008

CreditLine Payment Processing Software Processor Setup - Chase Paymentech Debit. This site can also be reached at http://docs.911software.com

→ Looking for better rates?   Get a Free Credit Card Processing Cost Comparison!

Contacts

Please see Processor Support Contact List

Firewall And Connection Information

Select Parameters as Shown

Connection Configuration

Host=netconnect.paymentech.net<br> TestHost=netconnectkavar1.paymentech.net<br> TestBackupHost=netconnectkavar2.paymentech.net<br> Port=443<br> App=/NetConnect/controller<br> Verb=POST<br> AuthContentType=PNSISO/HCS<br> SettleContentType=PNSISO/HCS<br>

Pin Pad Setup

See Pin Pad for individiual pin pad connection settings.

Merchant Setup

Authorization Setup

Select Debit if present or an un-used card type, such as unused gift card processor or private card and click Edit

Fill out the highlighted areas as shown and click OK

Important Notes

• Card Ranges are not used in debit cards and are ignored
• Class Default means that this setup is the default for all debit card connections (normally, you will only have one)

Settlement Configuration

• Enter CreditLine Settlement Parameters Dialog

• Select the fields as shown below

→ Make sure to check Apply to Auths!

Also See

CreditLine Setup Sheet